Protecting car leather: lacquer, wax and waterproofer for seats.

The leather in your car is exposed to daily wear, sunlight, temperature changes and UV rays.

Without protection, the original lacquer wears away and the leather dries out.

Regularly apply a protective product, a finishing lacquer or a waterproofer to extend the life of your upholstery and preserve its suppleness.

Sofolk offers a range of products to protect the leather in your car, such as lacquers and protective waxes.

Our range of products to protect your car leather

Which protective product should you choose for your car leather?

The protector depends on how you use your car and the level of protection you want.
Before any application, clean the leather thoroughly to remove sebum and dirt.

Discover our products suited to cleaning the leather in your car.

Mistakes that damage leather instead of protecting it

Nourishing leather creams moisturise the fibres but do not protect against friction and UV rays.
Household products attack the finishing lacquer and make fading worse.

The only effective protection is a transparent film, a finishing lacquer or a waterproofer, which replaces the factory coating worn away by daily use.

Silky Lacquer: maximum protection

The leather Silky Lacquer protects the colour and the grain of the leather on your car seats.
It is available with anti-UV protection and replaces the factory lacquer.
Easy to apply with a microfibre cloth or a sponge. For heavily used seat bases (driver's seat), add the catalyst to reinforce the mechanical resistance of the lacquer.

Protective wax: easy application

The protective wax waterproofs the grain of the leather and gives a satin feel. Easy to apply, it is ideal for regular care of the passenger seats and the rear bench seat.

Waterproofer: the anti-stain barrier

The water-repellent waterproofer creates an invisible barrier based on silicon nanoparticles. It protects leather, faux leather and fabric against water, grease, stains and dirt, without leaving marks.

Duration of effect: 6 to 12 months.

Apply with a microfibre cloth in two to three thin coats for an optimal hydrophobic effect.

Black lacquer: special for dark leather

The black lacquer protects and revives slightly faded black leathers. Satin or matt finish. Ideal for black seats without complete recolouring.

For faded leathers, discover our recolouring solutions for all manufacturer colours!

The Sofolk tip: for the driver's seat base, combine the Silky Lacquer with the catalyst for maximum resistance to friction.

Protect your car seats in three steps.

Applying a protector to the leather in your car is easy and requires no special skills.

1. Clean the leather with the cleaner / stain remover to remove sebum and dirt, making it easier for the protector to be absorbed.
2. Apply the protector: spread the Silky Lacquer or the protective wax with a microfibre cloth in thin, even coats. For an enhanced hydrophobic effect, add the Waterproofer. Water and grease no longer penetrate.
3. Leave to dry: follow the product instructions. The lacquer creates a protective layer that resists friction, sunlight and stains.

Apply this barrier regularly to renew your seat bases. They will keep their colour, their suppleness and their silky feel, which sets them apart from leather that ages prematurely.

Nourish and care for your leather regularly for lasting protection! 

Why protect your car leather against wear and fading

All car leathers have a transparent finishing lacquer that protects the colour and stops dirt from penetrating.

Over time, friction, sebum, sunlight and heat destroy the protective layer.
The leather fades, shows surface scratches, absorbs stains and cracks.
Every day without protection, the factory lacquer gradually thins, and then cracks suddenly appear.
Regularly applying Sofolk Silky Lacquer is enough to prevent premature deterioration.

On leather in good condition, protecting it avoids costly repairs or recolouring.

The sums are simple: a bottle of Silky Lacquer at €14.99 protects your seats for the long term.
Recolouring costs €50-100 in products. An upholsterer charges €200-800 per seat.

Protection is the most cost-effective care.

Leather already damaged? Repair cracks and tears with our repair products!

For damaged leather, first follow the steps of car leather renovation: cleaning, repair, recolouring and protection.

Discover our complete renovation kits: cleaning, repair, recolouring and protection.

Why choose Sofolk products to protect your leather seats?

Since 1989, Sofolk has been a French manufacturer of lacquers and waterproofers in Bordeaux.

Our products respect leather, do not damage it and protect it from deterioration. Send us a photo for personalised advice.

Technical support included (telephone and forum).

Frequently asked questions: protecting your car’s leather

When should I protect the leather in a car?

Regularly apply the Silky Lacquer to renew the protective barrier. The driver's seat needs more frequent applications. The waterproofer offers protection for 6 to 12 months.

What is the difference between Silky Lacquer and protective wax?

The Silky Lacquer is the most resistant to friction and UV rays, while the protective wax is easier to apply and gives a satin, "candle-wax" feel. For the driver's seat base, we recommend the Silky Lacquer with catalyst. For the passenger seats and the bench seat, the wax is enough.

Do I need to protect new leather?

Yes. New leather has a protective lacquer that wears quickly. Applying the Silky Lacquer or the waterproofer delays the appearance of the first signs of wear and extends the life of the leather. It is the most cost-effective care step.

How do I moisturise the leather in a car?

To moisturise car leather, use a specific oil after cleaning. Sofolk Nourishing Oil penetrates the pores of the leather to restore it without making it greasy. Avoid hand creams or body lotions, which damage the finishing lacquer. Alternate moisturising and protection for a complete routine.

Which product will protect the leather in my car?

The Silky Lacquer resists friction and sunlight for the driver's seat. The protective wax is easy to apply for regular care. The water-repellent waterproofer repels water and stains on all leathers. For complete protection, use the Silky Lacquer as a base coat and the waterproofer as a finish.

Does the lacquer change the appearance or feel of the leather?

The lacquer gives a satin, silky feel, close to the factory finish. The protective wax gives a waxy feel. The waterproofer is invisible and does not change the appearance or feel.