The leather renovation of the steering wheel, driver's seat, passenger seat, rear seat, door trim, dashboard or gear lever will be easily achieved with our automotive leather renovation kits. You will be able to repair cracks, cracks, scratches, leather wear and small holes of less than 1cm, recolour in the colour of your choice, protect your colouring and leather from friction and finally rehydrate.
Leather renovation is within everyone's reach. It does not require any special skills!
A complete instructions manual including the order of application of the products and their drying time is systematically provided with our kits.
Partial renovation is cheaper and faster, but it is much more risky. Every time you do, you will have a lack of homogeneity. The retouching requires a perfectly identical colour, made from a sample of your leather, and not that of the manufacturer who has not been exposed to the sun or cleaning products.
We advise you to get enough products to renovate the entire seat, then make your touch-up. If the result is not satisfactory, you can then renovate the entire seat.
In our opinion, it is preferable to have enough recolouring and varnish to renovate the leather of the two front seats. Many people decide to recolour the 2nd seat after a renovation in order to have a perfect homogeneity.
Unless you decide to apply our recolouring spray (spray gun, aerosol, etc.), it is perfectly possible to renovate your leather car seats (or other elements) directly inside your car. Difficult to access or narrow areas can be recoloured with a sponge or brush.
The choice to decide to recolour the invisible parts is yours and depends on your level of requirement.
Our protective leather spray varnish can also be applied directly to the inside of your vehicle because it is colourless. However, plan to protect the nearby elements as little as possible.
The duration of the renovation (without removing the seats), depends on the surface area and especially on the condition of your seats. Repairs and drying times are actually the most time consuming. The application of recolouring and varnish is relatively simple and quick.
To restore the leather of a slightly cracked car seat, allow 1 to 2 hours of work and as much time to dry.
If you plan to renovate the entire vehicle without stress, plan a WE.
Our forum is at your disposal for all your questions about the use of our products.
100% french manufacturing since 1989!
Payment CB, Paypal, bank transfer
7 working days
2 to 5 additional working days if paint made-to-measure
+33 5 57 34 69 72
From Monday to Friday
from 9.30AM to 12.30PM and 13.30PM to 18.00PM