leave a message
RENOVATION PRODUCTS FOR LEATHER, LEATHERETTE, PLASTIC...
Customer area
Cart
FR
EN
ES
IT
French products direct from the manufacturer

PLASTIC REPAIRER

      1 REVIEWS

  only 16,99per unit
16,99  -0% off

until
 16,99per unit
  • Manufacturing within standard delay.
  • + 9,99 (flat rate)
    Custom manufacturing costs
    Manufacturing within 2 to 5 business days.
  • + 49,99 (flat rate)
    Custom manufacturing costs
    Manufacturing within 2 to 5 business days.
  • + 24,99 (flat rate)
    Custom manufacturing costs
    Manufacturing within 2 to 5 business days.
Qty :  Add to cart  Unavailable
Shipping fees : 2,99 € only, if this product is sold alone (Metropolitan France only)
FINISHING
SIZE

Surface scratches can be removed by polishing, but if the groove is deep the only solution is to fill the lack of material and repaint the repaired surface.

The SOFOLK "RepaGriff" makes it easy to fill in the groove which will disappear after applying two coats of plastic paint.
 
There are two possible cases: a repair to be carried out on a smooth plastic, and a repair to be carried out on a grained plastic. In both cases the first two operations, cleaning and spreading the RepaGriff, are the same. The second one will require the use of impression transfer.
 

ERASE SCRATCHES ON SMOOTH PLASTIC

  1. Clean the surface to be repaired and recoloured with acetone or a good degreaser. Allow to dry
  2. Apply a thin coat of "Repagriff" with the brush fixed on the bottle cap, wait two hours before filling the groove until a swelling of a few tenths of a millimetre is obtained. Leave to dry for about 4 hours to obtain a hard material.
  3. Gently sand the excess with circular movements to obtain a flat surface to the touch.
  4. Preferably apply two coats of plastic paint, preferably by spraying.
If the re-coloured surfaces are subject to a lot of rubbing, apply a good coat of plastic varnish twice a year.   
 

ERASE SCRATCHES ON SEED PLASTIC

  1. First take an optical impression 24 hours before starting the repair (see Operating Instructions for Transferring optical impressions). 
  2. Clean and fill in the groove as described above, but only wait until the repagriff becomes soft . Press strongly to transfer the impression, start again if the surface is too soft or too hard, this operation is delicate, take your time to carry it out well.
  3. Leave to dry for 2 hours or until the surface becomes hard. 
  4. Recolour and varnish if necessary

Available in 25GR.

this kit includes the following products :
Direct from the manufacturer

100% french manufacturing since 1989!

Secured HTTPS site and payment

Payment by CB, PayPal, Bank transfer

more information
shipping

7 working days
2 to 5 additional working days if paint made-to-measure

technical support

+33 5 57 34 69 72
From Monday to Friday
from 9.30AM to 12.30PM and 13.30PM to 18.00PM