REPAPLAST 2K BLACK - HIGH-STRENGTH TWO-COMPONENT PLASTIC REPAIR COMPOUND





An innovative solution for repairing plastics, in the automotive sector and beyond
Scuffed bumper, cracked trim, broken mounting tab, damaged dashboard: REPAPLAST 2K Black is a fast-curing two-component repair compound designed for both hard and flexible plastics, especially in the automotive sector.
It can be used both to bond parts and to fill missing material or a crack. Combined with an impression taken with ReproGrain paste, it can also give the repair the grain of the original plastic.
It sets in 90 seconds and can be sanded after 10 minutes: a repair is completed in record time. It does not sag, run or shrink. Once sanded, it can be painted with SOFOLK plastic paint, so that the repair matches the colour of the part.
Key points
- Hard and flexible plastics: bumpers, trims, housings, interior panels, dashboards
- Can also be used on wood, concrete, thermoset composites, carbon fibre and coated metals
- About 30 seconds to work the product, sets in 90 seconds, sanding after 10 minutes
- Resistant to moisture, chemicals and temperature changes
- No adhesion primer needed in most cases, but a compatibility test is still essential
Contents and storage
- 1 × 50 ml cartridge, black
- 2 mixing nozzles included; to have spares, a set of 5 mixing nozzles is available
- To be used with our application gun for two-component cartridges (not included), the same one as for ReproGrain
- Keeps for up to 24 months in a cool, dry place, away from direct light
Instructions for use
- Test the product on an inconspicuous area to check its compatibility with the plastic.
- Sand the area lightly with abrasive paper, 240 to 400 grit.
- Degrease with isopropyl alcohol or acetone, then leave to dry.
- Apply: fit the cartridge and a mixing nozzle to the gun, then apply the product directly to the area to be repaired. You have about 30 seconds to work it.
- Reproduce the grain if needed: immediately place the ReproGrain mould on the still-fresh product and keep it pressed until it sets, about 90 seconds.
- Sand after 10 minutes, then paint with SOFOLK plastic paint.
Our advice: with around thirty seconds of working time, everything must be ready before you squeeze the gun: area sanded and degreased, mould within reach. On a part cracked right through, such as a bumper, also plan a suitable reinforcement on the back of the part: the product bonds and fills, but a part under stress needs to be reinforced.
Textured plastics: a simpler solution
When an exact reproduction of the grain is not needed, our texturing agent for plastics offers a simpler route: it gives the repaired area a lightly textured surface, ready for painting.
Products mentioned on this page
-
AUTO PLASTIC SPRAY PAINTPaints car plastics, and metal very well, inside and outside
24,99 €
View product
-
REPROGRAIN: PASTE FOR REPRODUCING GRAIN IMPRINTSFaithfully reproduces the grain pattern
19,99 €
View product
-
50 ml dual-cartridge gun: ReproGrain and REPAPLAST 2KFor ReproGrain and REPAPLAST 2K 50 ml two-component cartridges
24,99 €
View product
-
5 mixing nozzles for ReproGrain and REPAPLAST 2K cartridgesMixes the two components as they leave the cartridge
2,99 €
View product
-
REPROTEX: TEXTURING AGENT FOR A REALISTIC AND DISCREET FINISHIdeal for restoring the original appearance after repairs
28,80 €
View product
Available in 50ML CARTRIDGE.
Learn more


