

One varnish for the living room sofa and the car seats
Tin in gloss or satin, aerosol in satin or matt, with UV protection
Water-based tin that can be reinforced with the catalyst, or an aerosol for speed
Can also be used on genuine leather
Essential Protection for Imitation Leather, Skaï, Vinyl, and PVC Surfaces
New faux leather leaves the factory with an invisible finishing varnish that takes the rubbing in its place. Over the years and with cleaning, this film disappears: left bare, leatherette marks easily, holds dirt and ages faster. SOFOLK colourless varnish rebuilds this transparent shield, whether your faux leather covers a living room sofa or your car seats.
Its formula adheres to faux leather, leatherette, vinyl, PVC and polyurethane, and even to genuine leather. After a colour refresh with our sofa paint or our car seat paint, it fixes the new colour and keeps it looking good.
From living room to car interior
- At home: sofas, armchairs, chairs, pouffes, headboards, stools, benches.
- On the road: car seats, door panels, armrests, headrests, motorbike seats.
- Elsewhere: office chairs, weight benches, faux leather bags and suitcases.
Tin or aerosol?
- The tin (200 or 500 ml) is applied with a sponge. Being water-based, it accepts the catalyst, which hardens the film and makes it more resistant to wear and moisture.
- The 400 ml aerosol suits those who want to work fast. Made with solvents, it is used in a well-ventilated room, following the instructions on the label; it does not take the catalyst.
The tin comes in gloss or satin, the aerosol in satin or matt, always with UV protection. Satin, discreet and close to the original look, suits the vast majority of seats and sofas.
How often should you varnish?
- On faux leather you have just repainted: 2 to 3 thin layers, applied as soon as the paint is dry.
- For maintenance: 1 or 2 layers, once or twice a year, where people sit and lean the most (seats, armrests, side bolsters).
The right steps
- Use the stain remover cleaner to remove dirt and greasy marks, then wait until the surface is dry. No need to sand: sanding is only justified when changing the colour.
- Do a test on an inconspicuous spot and wait 24 hours: the varnish must be dry and hold perfectly.
- Spread the varnish in a thin layer with a barely damp sponge, chasing out bubbles as you go. With the aerosol, cross light passes at about thirty centimetres.
- Let each layer dry before the next. The sofa or seat will wait until the last layer has dried.
Consumption guide: about 3 m² per coat for a 200 ml tin or a 400 ml aerosol. Over 2 to 3 coats, 200 ml protects an armchair or one and a half car seats; 500 ml, a 3-seater sofa or the whole interior of a car.
Products mentioned on this page
-
Powerful leather stain removerLeather, faux leather, nubuck, Alcantara, fabric, plastic, stainless steel, aluminium…
14.99 €
View product
-
Catalyst for Silky Leather VarnishImproves rub resistance, adhesion and water resistance
9.99 €
View product
-
Faux leather and leatherette sofa paint: all coloursWater-based paint for leatherette, faux leather, vinyl and polyurethane sofas and armchairs
24.99 €
View product
-
Faux leather and leatherette car seat paint: all coloursWater-based paint for leatherette, faux leather, vinyl and polyurethane car seats
24.99 €
View product
Available in 200 ML, 500 ML, SPRAY 400ML.
This product is suitable for renovating:
- Car
- Sofa, armchair
- Boat
Learn more


