




How does SOFOLK's aluminium wheel varnish work?
SOFOLK aluminium wheel varnish leaves a clear, glossy film that protects your wheels every day. It does not yellow over time and does not change their appearance. Many car restorers use it.
Wheels that are easier to keep clean
Brake dust and road dirt cling less to a varnished surface, so every wash is quicker. The varnish withstands pressure washing.
Which surfaces can this varnish be applied to?
- Aluminium wheels and hubcaps on cars, vans and motorbikes
- Stainless steel and copper
How to use
- Clean and degrease the wheel with SOFOLK wheel cleaner, then let it dry.
- No need to remove the wheel: simply protect the tyre with a piece of cardboard.
- Shake the aerosol for at least one minute after the ball starts to rattle.
- Spray with a back-and-forth movement, from 20-30 cm.
- Apply at least 3 coats, 45 minutes apart. Wait 3 hours before any contact.
Specifications: dust-dry in 10 minutes, touch-dry in 45 minutes, hardened in 3 hours (at 20 °C). One 400 ml aerosol is enough for 3 coats on 4 x 20-inch wheels.
Products mentioned on this page
Available in 400 ML.
Learn more



