STAINLESS STEEL EFFECT PAINT

Stainless steel effect decorative paint, protective and anti-corrosive

A paint for decorating, but also for protecting metals against corrosion and repairing stainless steel surfaces such as bodywork.

Ideal for recolouring wheel rims, metal furniture or bodywork, plastic accessories, wooden furniture or glass or ceramic accessories.

Adheres to metals, almost all plastics, glass, wood, cardboard and other materials you can test. 
Acrylic paint containing a high concentration of stainless steel pigments.
Withstands temperatures of up to 300°C for short periods.
Re-coat with Sofolk Wheel Polish for wear and weather resistance.

1 aerosol = 4 m² in one coat 

Drying (at 20°C): Dust dry approx. 15 mins. Touch dry (approx. 30 minutes). Hardened after 8 hours. This information naturally depends on the thickness of the coat and the ambient temperature. 

SURFACE PREPARATION :  
Carefully remove all traces of residue (grease, oil, dust, oxidation etc.), lightly sand or sandpaper. Cover adjacent surfaces.

INSTRUCTIONS FOR USE :
Bring the aerosol to room temperature.
Shake vigorously for approximately 30 seconds.
Spray from a distance of 25-30 cm.
Carry out a compatibility test on the substrate. If the paint does not adhere or does not dry, applying a suitable primer beforehand will solve the problem.
Turn the can upside down after use and empty the valve.